Your Recovery Room Should Be a Profit Centre — Not a Problem You're Managing.

If your current setup is showing any of these signs, the equipment is the problem — not cold water therapy.

✗ Temperature climbing past 10°C by midday — no matter what you do

✗ Compressor running non-stop — still can't keep up

✗ Clients trying recovery once and never booking again

✗ Repairs and part replacements every few months

✗ The "commercial" chiller you bought wasn't built for this

See Which System Fits Your Setup →

Takes 90 seconds. Gives you a specific recommendation based on your pool size and daily volume.

Most "Commercial" Chillers Aren't Commercial.

Most of what gets sold as commercial recovery equipment is residential technology with a commercial price tag. It's designed for one tub in a backyard — not 30 to 300 sessions a day in a professional facility.

They're heat pumps with cooling logic bolted on. Designed for domestic pools, not ice baths. Not engineered for the constant load a commercial facility puts on them.
The spec sheet says one thing. The water says another. "Reaches 3°C" in a brochure means nothing when the water is sitting at 12°C after 15 sessions on a Saturday morning.
Parts come from overseas. Warranty claims take weeks. Your room sits empty while you wait for a replacement impeller from a PO box you can't call.
Your clients notice — they just don't tell you. They try the cold plunge once, the water isn't cold, and they quietly stop booking. You blame cold therapy. The equipment was the problem.

We hear this story from facility owners every week. Same pattern, different city.

What Actually Works at Commercial Volume.

These are the specs that separate real commercial equipment from rebranded residential gear.

✓
Commercial refrigeration compressors — rated for continuous duty Not a residential heat pump running in reverse. A refrigeration compressor engineered to run under load, all day, without cycling out or overheating.
✓
Temperature that holds under full commercial load 5°C when 40 people have come through — not "reaches 5°C in a cool room with nobody in it." The difference between a spec sheet and a working Saturday.
✓
Split-system architecture — compressor outside the room No heat dumping into your recovery space. No compressor noise where your clients are. No fighting your air conditioning while trying to hold cold water.
✓
Parts available from Australian refrigeration suppliers When something needs attention, it gets sorted with local parts and local trades — not a four-week wait from overseas.

Note: Bergs chillers manage water temperature. Filtration and water treatment is a separate system — most commercial facilities already have this in place. If you don't, we'll point you in the right direction.

Trusted by Facilities That Can't Afford It to Fail.

Powerhouse Gym Roar Active World Gym Sol State Reset Sanctuary Sol Saunas The Zen Den

"After 6 months of struggling with a heat pump that only reached 13–14°C, we found James from Bergs. Within a day of installing the Bergs chiller, our cold pools went from 14°C down to 5°C and are holding temperature with ease."

Earl Pretty — Powerhouse Performance & Recovery

"We'd already been through four different chiller companies. None of them could deliver what we needed. Bergs had the data, the planning evidence, and the confidence to guarantee they'd hit the temps. Three months later — hasn't missed a beat."

Gav — Roar Active, Bibra Lake

"Every conversation I had with other suppliers felt the same — lots of promises, but no one confident enough to guarantee their gear would actually work. Since the Bergs install — no breakdowns, no service calls, no unhappy members."

Luke — World Gym (Tuggerah + Prospect)

"Within a week of opening, the chiller-tub combos I'd been sold as commercial gear weren't holding up. Constant breakdowns, murky water, zero support. Since the Bergs retrofit — temps sit exactly where they need to be. No more babysitting."

Corey — The Reset Sanctuary, Sunshine Coast

Built for Commercial Facilities.

We work with facilities running real commercial recovery volume — not residential setups.

Gyms & CrossFit Boxes

Recovery Studios

Wellness Centres

Hotels & Resorts

Physio & Sports Rehab

Aquatic Centres

Bathhouses & Day Spas

Sports Clubs

Not sure if your setup qualifies? Run the calculator — it takes 90 seconds and tells you whether a Bergs system makes sense for your pool size and daily session volume.

Questions We Get Asked Before Every Install.

Will this work with our existing tubs?

Yes. The Bergs system connects to any tub configuration — single, two-tub, or multi-tub setups. We design the circuit around what you already have. No need to replace your tubs unless they're failing for other reasons.

What does installation involve?

A qualified refrigeration mechanic handles the balanced circuit between the chiller and your tubs. An electrician wires the outdoor compressor unit. If you don't have tradies you trust, we'll connect you with people we've worked with in your area.

What about electricity costs?

A commercial system properly sized for your load is more efficient than running a mismatched residential unit at full capacity all day. Actual consumption depends on your daily volume and ambient conditions — the calculator will match you to the right system for your load.

What's the support like after installation?

You call us directly. No overseas call centres, no ticketing systems. Parts are sourced from Australian refrigeration suppliers so most issues resolve quickly — not after a multi-week wait.

How do I find out which system is right for my facility?